[lug] off subject: Sun problem.
gilmorea at verglas.Colorado.EDU
Thu Oct 28 13:29:49 MDT 1999
Hey Jason, you working with Anne?
At any rate, did you say that the laptop has no problems reading the drives?
Hardware and cabling is of course, the other main issue to consider.
What kind of SCSI card does the ultra 10 have in it? I know the Ultra 5's (one
under my desk) don't have SCSI unless it's added on?
What cables are you using to hook these up?
On Thu, Oct 28, 1999 at 01:14:22PM -0600, Jason Cross wrote:
> Hi guys,
> This is not exactly a Linux problem, but I need some help, and you
> guys are the only ones I have left.
> I do seismology experiments, in which I bring back large numbers of
> SCSI disks from field instruments, and read them off onto an ultra 10.
> I'm having a heck of a problem getting the disks to read. It seems to be
> some intermittent hardware problem (maybe with the SCSI or PCI buses?).
> Anyway, the people who are supposed to be my tech support don't know
> whats going on (their words, not mine). They are going to try to ship me
> a Sparc 5, but I'd rather keep the ultra 10 if I can get it to work.
> If worse comes to wors, I can use a Linux laptop with a scsi card and dump it
> to the ultra via NFS, but that's a long way around (the Linux laptop doesn't
> have any problems!!)
> Anyway, I can sometimes use the disks (usually just one), and then I can't use any others, and an error message comes up on the console window complaining about
> "reserved phase" errors.
> When it works, I can do a probe-scsi-all on the setup screen, and it will finhe disk, however, when it doesn't work I'll get the following error:
> > probe-scsi-all
> /pci at 1f,0/pci at 1/scsi at 1,1
> Script interrupt: Reserved phase
> I switch disks pretty much at will, but I was given to understand that this
> was O.K., as we aren't mounting them or anything, a program more or less just
> does a dd, and dumps the data off of them. Then I plug in the next one and
> do the same.
> The tech support people gave me a new power supply for the disks, saying that
> the problem was probably that the external power supply for my disks needed
> to be grounded to the computer case. That didn't fix it.
> Anybody have any clues? I'd be very greatful for anything to try!!
> -Jason Crosswhite
> jason at newberry.uoregon.edu
> Web Page: http://lug.boulder.co.us
> Mailing List: http://lists.lug.boulder.co.us/mailman/listinfo/lug
More information about the LUG