[lug] sig 11 errors with Linux

George Sexton gsexton at mhsoftware.com
Thu Jun 29 10:28:51 MDT 2000

If you have the Enlight case, do you have an additional fan mounted in the
bottom front of the case? By default, they don't come with one there. They
have a little snap off, white plastic cage for holding them.

> -----Original Message-----
> From: lug-admin at lug.boulder.co.us [mailto:lug-admin at lug.boulder.co.us]On
> Behalf Of Gary Hodges
> Sent: Wednesday, June 28, 2000 10:23 PM
> To: lug at lug.boulder.co.us
> Subject: Re: [lug] sig 11 errors with Linux
> On Wed, 28 Jun 2000, llornkcor wrote:
> > My first thought was maybe the voltage was set wrong on the MB.
> > Is there a heat sink and fan? Was heatsink goo used? Do cables
> > block air passage directly to the CPU? Do you experience sig11's
> > when the cover is off? Perhaps the power supply is wiggin'.,
> I've double, and triple checked the core voltage.  It is set for this
> processor.  There is a heat sink and fan(s), all working fine with good
> air flow as far as I can tell, but there is no "goo" between the sink
> and processor as others have inquired about.  No sig 11's with the side
> and front covers off.  I'll have to look into checking the power supply.
> Gary
> _______________________________________________
> Web Page:  http://lug.boulder.co.us
> Mailing List: http://lists.lug.boulder.co.us/mailman/listinfo/lug

More information about the LUG mailing list