[lug] Linksys NC100 and Linux

Bonnell, Doug DBonnell at BreeceHill.com
Tue Aug 1 10:22:08 MDT 2000

I wish I had written down the version of the driver.
As I recall, I picked up the driver source in early April.
I don't think it had been modified since last summer.

The version of driver supplied with the NC100 cards just
did not work at all under Linux. The module would load,
but the card was dead. No activity at the LEDs at all. This
was also true for the tulip module on the stock RedHat
distribution ( v6.0 and v6.2). I believe that tulip.c got 
changed within a couple months after v6.2 hit the streets.

If you could, would you Email me a copy of tulip.c? I have
v6.2 running on a machine here, so it would be easy to do
a comparison to see if it's the latest version.

Doug Bonnell

> -----Original Message-----
> From:	John Starkey [SMTP:jstarkey at ajstarkey.com]
> Sent:	Tuesday, August 01, 2000 10:13 AM
> To:	'lug at lug.boulder.co.us'
> Subject:	RE: [lug] Linksys NC100 and Linux
> Forgive any ignorance tht may ensue :} but, everyone here has been
> helping me so I thought I'd try returning something.......
> I've got both tulip files here and if you need them now I can send them...
> now if they've been modified.... well.....
> John
> On Tue, 1 Aug 2000, Bonnell, Doug wrote:
> > Chip Atkinson,
> > 
> > I tried your Email address, but mail bounced. Try contacting
> > me directly at:
> > 
> > dbonnell at breecehill.com
> > 
> > I have the tulip.c and tulip.o files you need for the NC100. They
> > are on a machine at home, so I could Email them to you this
> > evening if I have the correct address.
> > 
> > Doug
> > 
> > 
> > _______________________________________________
> > Web Page:  http://lug.boulder.co.us
> > Mailing List: http://lists.lug.boulder.co.us/mailman/listinfo/lug
> > 
> _______________________________________________
> Web Page:  http://lug.boulder.co.us
> Mailing List: http://lists.lug.boulder.co.us/mailman/listinfo/lug

More information about the LUG mailing list