[lug] cisco 675/ppp question
CAtkinson at Circadence.com
Wed Nov 15 09:53:35 MST 2000
And for completness' sake, a serial connection as well.
> -----Original Message-----
> From: ljp [mailto:llornkcor at llornkcor.com]
> Sent: Wednesday, November 15, 2000 9:27 AM
> To: lug at lug.boulder.co.us
> Subject: Re: [lug] cisco 675/ppp question
> > The 675 gets the static IP on the wan0 end. The other ends get the
> > addresses. One thing you don't distinguish is whether it's
> using the dhcp
> > client or dhcp server. If the client is being used, then
> it's on the wan0
> > end, and if it's the server, it's serving 10.0.0.x clients.
> You don't
> > the dhcp server really. You can just assign 10.0.0.1 to
> the eth0 port and
> > then 10.0.0.x to your machines. This will make your life
> easier because
> > don't have to worry about dhcp on the linux end which is
> kind of a pain.
> > Your computers only deal with the cisco's eth0 end and only
> know enough to
> > send packets to it to get out to the rest of the world. I
> believe that
> > netmask for the computers is 255.255.255.0, despite the
> class A IP of
> > 10.0.0.x. You can query this stuff by telnetting into the cisco.
> > Chip
> There's a web interface to the 675 also, but you'll have to
> telnet into it
> to set it enabled.
> Web Page: http://lug.boulder.co.us
> Mailing List: http://lists.lug.boulder.co.us/mailman/listinfo/lug
More information about the LUG