hugh at vecna.com
Tue Jul 16 22:16:40 MDT 2002
On Tue, 2002-07-16 at 04:35, Warren Sanders wrote:
> I'd go an easier route; assuming the masq box has one nic. Do an alias
> for that nic so that it is both 192.168.1.1 and 22.214.171.124.
> But now that I did some research on this, I found this page that may
> blow my suggestion out.
The masq'ing box has two nic's. One on the outside and one on the
inside. For now, I just want the internal network to talk to the other
one. I'll worry about external access later.
I aliased the internal nic to the 126.96.36.199 subnet and can ping the
other hosts on the network. I would like machines on the 192.168.1.0
network to be able to talk to the 188.8.131.52 network. Unfortunately,
they can't. I can ping 184.108.40.206 (the masq box) but I can't ping
other 192.190.1.x boxes.
route on the masq box:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use
192.168.1.1 0.0.0.0 255.255.255.255 UH 0 0 0
xxx.xxx.xxx.xxx 0.0.0.0 255.255.255.255 UH 0 0 0
220.127.116.11 0.0.0.0 255.255.255.255 UH 0 0 0
127.0.0.1 0.0.0.0 255.255.255.255 UH 0 0 0
xxx.xxx.xxx.xxx 0.0.0.0 255.255.255.192 U 0 0 0
18.104.22.168 0.0.0.0 255.255.255.0 U 0 0 0
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0
0.0.0.0 xxx.xxx.xxx.xxx 0.0.0.0 UG 0 0 0
Sorry about the word wrap. evolution doesn't seem to let me configure
it seems like there is a route to use eth1 for all traffic on
22.214.171.124/255.255.255.0 but I've been wrong many a time before.
What am I missing?
> Hugh Brown wrote:
> >network newbie question.
> >I am in a bit of situation.
> >We won the second phase of a contract and have the job of porting a
> >windows based system to an os independent system. The company delivered
> >the machines but put them on the 192.190.1.x/24 subnet and told us that
> >changing the ip address of the two systems would be burdensome to do.
> >Their obligation is to deliver a system that works. It seems to work
> >okay, but I don't know how to get the two systems to see the Internet at
> >I have the two systems on an ipchains masqueraded network.
> >How do you normally put two distinct subnets on a network and get them
> >to go out to the right destination
> >Here's the setup
> >Internet--- external interface (ipchains box) 192.168.1.1----|
> > |
> > Internal Network
> > |
> > |
> > 192.190.1.x/24
> >I know I haven't explained this very well so please help me clarify.
> >Web Page: http://lug.boulder.co.us
> >Mailing List: http://lists.lug.boulder.co.us/mailman/listinfo/lug
> >Join us on IRC: lug.boulder.co.us port=6667 channel=#colug
> Warren Sanders
> Web Page: http://lug.boulder.co.us
> Mailing List: http://lists.lug.boulder.co.us/mailman/listinfo/lug
> Join us on IRC: lug.boulder.co.us port=6667 channel=#colug
More information about the LUG