[lug] [OT] WIC T1 or 56k

TJ Schuler timothy.schuler at attbi.com
Wed Sep 25 15:44:10 MDT 2002

This really will depend on what type of 56K circuit you have; if it is a DDS
circuit like most 56k lines I have seen then it will not work, but if it is
a "fractional T1" as you say (ie a single DS0 on a T1 line) then it should
work fine.


TJ Schuler, CCIE #8800
Coleman Technologies, Inc.
720-981-4276 Office Phone
720-339-6000 Cell Phone

----- Original Message -----
From: "kmoore" <kmoore at mooreimages.com>
To: <lug at lug.boulder.co.us>
Sent: Wednesday, September 25, 2002 12:11 PM
Subject: [lug] [OT] WIC T1 or 56k

> I'm in a bind here. Anyone know whether a Cisco with a T1 WIC will work
> with someone that has a fractional 56k T1? I know a 56k WIC won't work
> with a 128k or higher.
> Thanks so much
> - Kyle
> _______________________________________________
> Web Page:  http://lug.boulder.co.us
> Mailing List: http://lists.lug.boulder.co.us/mailman/listinfo/lug
> Join us on IRC: lug.boulder.co.us port=6667 channel=#colug

More information about the LUG mailing list