[lug] libre office question
matuse at gmail.com
Wed Dec 20 09:28:27 MST 2017
I'm interested in this topic as well - was trying to help my wife with
LibreOffice on her Mac and had the same issue - could not for the life of
me figure out how to change the print orientation. As already suggested as
a hack, I ended up running it out to a PDF and then rotating the print of
the PDF. Shouldn't have to do that.....
I'm thinking this might be a fight between the printer driver and LO? or
is it a print subsystem fight with LO?
In any case - I'm curious if someone has successfully found the check box
for this - possibly with a different print driver / subsystem / etc?
FWIW - I have an HP CP1525nw
On Tue, Dec 19, 2017 at 12:09 PM, Jed S. Baer <blug at jbaer.cotse.net> wrote:
> On Tue, 19 Dec 2017 12:32:34 -0500
> Steve Litt wrote:
> > If you mean that the pickup rollers won't grab the 3x5 or 4x6 in
> > landscape mode, that's a mechanical problem you can't overcome without
> > manually feeding them in.
> It does seem like a mechanical feed problem. But this makes sense with
> the original intent of the question, as I understand it. 3x5 and 4x6 feed
> OK the long way, but not the short way, so we can conclude that under 5
> inches doesn't work. Therefore, the sought after fix is to be able to
> feed them the long way, with the printing still going along the long
> dimension. And, to do it all within LibreOffice.
> I still think a rotated text box would do it.
> Web Page: http://lug.boulder.co.us
> Mailing List: http://lists.lug.boulder.co.us/mailman/listinfo/lug
> Join us on IRC: irc.hackingsociety.org port=6667 channel=#hackingsociety
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the LUG